| Product Guide - A 20-page brochure showcasing Emerson Network Power's embedded computing product line.
Selector Guide - A companion document to the Product Guide, this 16-page document includes product/feature comparison tables for each product line. |
|
|
Pm8540 ProcessorPMC module with Freescale 8540 PowerQUICC III integrated processor- VITA32 ProcessorPMC
- Freescale 8540 PowerQUICC III integrated processor
- 256 or 512MB Dual Data Rate DRAM
- 32MB Flash
More |
 |
Pm8560 ProcessorPMC module with up to 8 E1/T1/J1 interfaces- Processor PMC (VITA32-2003) with up to 8 software selectable E1/T1/J1 interfaces
- Freescale Semiconductor
- MPC8560 PowerQUICC III communication processor
- Up to 512MB Double Data Rate SDRAM with ECC
More |
|
|
PrPMC2750- PowerPC 750GX processor at up to 1.0 GHz in single-processor configuration
- Highly integrated Marvell Discovery II system controller
- Up to 1GB DDR SDRAM memory
- 64-bit/66 MHz PCI bus interface
More |
|
|
PrPMC2800- High-performance symmetric multiprocessing (SMP) platform
- MPC7447A PowerPC G4 processor running at up to 1.0 GHz in single or dual processor configurations
- 128-bit wide AltiVec technology support
- Highly integrated Marvell Discovery II system controller
More |
|
|
PrPMC6001- MPC7448 PowerPC G4 processor running at up to 1.4 GHz
- 128-bit wide AltiVec technology support
- Highly integrated Marvell Discovery III system controller
- Up to 1GB DDR SDRAM memory
More |
|
|
PrPMC800- MPC7410 PowerPC microprocessor
- AltiVec technology
- Latest high-performance PowerPlus III Architecture
- 2MB/1MB of L2 cache
More |
|
|
PrPMC8150- MPC750FX microprocessor
- High-performance PowerPlus III Architecture
- Up to 512MB on-board ECC SDRAM
- Up to 64MB on-board flash
More |
|
PPCBug Firmware
Command-driven user-interactive software debugger. Debugging commands are available for loading and executing user programs under complete operator control for system evaluation.
Command-driven diagnostic package for testing and troubleshooting.
Microprocessor, firmware, and hardware initialization routines. Products Running PPCBug Firmware:CPCI-6065 and the MVME5100. More |
 |
PMCspan
The PMCspan board allows users to customize their exact I/O requirements with Motorola's VME based CPU modules designed around the PowerPlus Architecture.
More |
 |
PmPPC440 PowerPC based ProcessorPMC- AMCC PowerPC® 440GP processor running at 400MHz
- Up to 133MHz PCI-X interface, backwards compatible with PCI 2.1
- 64MB, 128MB, 256MB, 512MB or 1GB DDR ECC SDRAM in SODIMM package
- Dual 10/100BaseTX Ethernet interfaces with front bezel access
More |
 |
PmPPC7448 PowerPC based ProcessorPMC- Up to 1.4GHz PowerPC®
- MPC7448 processor
- Up to 2GB SDRAM in SODIMM packaging
- Marvell Discovery III system controller
More |
 |
PmPPC750f PowerPC based ProcessorPMC- PowerPC 750FX processor running at 733MHz+
- 128MB, 256MB, 512MB or 1GB ECC SDRAM in SODIMM package
- 32/64-bit 33/66 MHz PCI with DMA
- Three 10/100 Ethernet interfaces
More |
